Prepping your pool for winter

It's Getting To Be That Time Again 

If ever there was the perfect year to install a pool at home, 2016 was it! This summer brought with it fantastic weather for pool owners across Ontario. Plenty of hot, humid days and warm evenings meant lots of opportunity for enjoying a refreshing oasis in your own backyard.

Now, as the summer months wrap up for another year, it's time to start thinking about closing the pool. Here are the steps you will have to tackle to prepare your pool for the long winter ahead.

1. Add a winterizing chemical kit to balance the water's chemistry for the winter season. Follow the manufacturer's instructions and always take measures to protect your hands, eyes and lungs from the harsh chemicals.

2. Shock the water with an extra strong chlorine or a non-chlorine substitute to kill bacteria, and the fungi and algae that may be living in the pool. Be sure to keep everyone out of the pool for a few days.

3. Clean the pool. Remove all equipment, including ladders, baskets, filters, etc., rinse off all equipment and lay out to dry completely. Skim the pool, vacuum and brush the water line.

4. Drain the water to appropriate level. The water line should be at least a few inches below the skimmer. To avoid damage to your expensive equipment over the winter, make sure to thoroughly drain pumps, filters, heaters and chlorinators. Use a shop vac or air compressor to blow out every last drop of water.

5. Be sure to blow out the plumbing lines as well and use plugs to ensure no more water enters them.

6. Cover the pool as tightly as possible to prevent debris and rainwater from entering. You can use air pillows to hold the cover up in the centre, allowing debris and moisture to slide off.

7. After equipment has dried completely, safely store indoors if possible.


Jeffrey Hewson
Sales Representative 
Century 21 Aberwin Realty



There are no comments

Thank you! Your comment has been submitted and is awaiting approval.

Blog Archives