Ways to remove scratches from 3 types of flooring

It is almost impossible to keep your flooring totally free from marks, scuffs or scratches! Kids, pets, furniture and shoes are just a few examples of ways scratches can be caused. Flooring is one of the most important features and looks in our homes, and unfortunately can be a costly thing to replace if it gets to out of hand. So if you do have a busy house hold and have a few scratches that you can’t bare to look at anymore try a few of these steps to minimize the look of the scratch or scuff.

Wood or Laminate – This is for large deeper scratches or scuffs the ones you really want to get rid of! First clean the area with a soft cloth and white vinegar and let fully dry. You will need to buy some wood filler from your local hardwood store, after you have left to dry use the wood filler and fill in the scratch and smooth out with a putty knife and let dry. You will need to go and also buy some wood stain closely matching the color of wood or laminate flooring that you are repairing. Apply the stain to the area that you have filled and let dry. Last step is to seal it so apple a small thin layer of lacquer.

Vinyl – When repairing this type of flooring you will want to make sure that the room is very well vented and maybe even consider opening a window. First you will want to clean the area with lacquer thinner, use a cloth and wipe the area down let dry. Remember to wear rubber gloves when handling lacquer thinner as it’s quite strong, maybe even wear a mask for extra protection. Next step is to place masking tape around the area and apply a small layer of liquid seam sealer to the scratch or scuffed spot and let dry. Remove masking tape and it’s all finished!

Ceramic or Porcelain Tile – This process is for smaller scratches in your tile or porcelain flooring. First clean the area with hot water and white vinegar and let fully dry. With a new cloth rub in a small amount of toothpaste until the scratch is completely filled, don’t use gel toothpaste. Then you will want to sand the area once it has dried until you have a smooth even surface. To seal it spray or paint a thin layer of urethane to coat and seal it.

I hope these simple easy steps save you a little bit of a headache when starring at the scratches on your flooring. 

Team Archambault

Team Archambault

Sales Representative
CENTURY 21 Advanced Realty
Contact Us

Tags